KERSHAW® SKYTRIM 75 G3 TRACKED

With a 75-foot reach, 2-speed shift-on-the-go transmission, 24" carbide-tipped saw, and many other features, the Kershaw® SkyTrim 75 G3 T can handle whatever you throw at it. 

DOWNLOAD BROCHURE
Kershaw® SkyTrim 75 G3 T, Tree Trimmer
Kershaw® SkyTrim 75 G3 T, Tree Trimmer

KERSHAW® SKYTRIM 75 G3 T

Progress Rail serves the vegetation management industry with reliable Kershaw® equipment to tackle tough maintenance jobs, accessing sites quickly and easily. Suitable for a variety of applications, our machines can perform tree and brush clearing for utilities, landscaping contractors, golf courses and residential usage, right-of-way clearing and more.

Our Kershaw® SkyTrim 75 G3 T is a rough terrain, tracked vehicle with telescoping boom and saw-type cutter head tree trimmer. 

of

Our Kershaw® SkyTrim 75 G3 T is a rough terrain, tracked vehicle with telescoping boom and saw-type cutter head tree trimmer.

of

Our Kershaw® SkyTrim 75 G3 T is a rough terrain, tracked vehicle with telescoping boom and saw-type cutter head tree trimmer.

of

Our Kershaw® SkyTrim 75 G3 T is a rough terrain, tracked vehicle with telescoping boom and saw-type cutter head tree trimmer.

of

Our Kershaw® SkyTrim 75 G3 T is a rough terrain, tracked vehicle with telescoping boom and saw-type cutter head tree trimmer.

of

With a 75-foot reach, 2-speed shift-on-the-go transmission, 24" carbide-tipped saw, and many other features, the Kershaw SkyTrim 75 G3 can handle whatever you throw at it. Contact us today to learn more!

of

Our Kershaw® SkyTrim 75 G3 T is a rough terrain, tracked vehicle with telescoping boom and saw-type cutter head tree trimmer.

TECHNICAL DETAILS

of

Frame: Welded construction front and rear mainframes. High strength alloy steel superstructure

Dimensions:  

Length = 42’ 3” (includes total length with retracted boom) 

Width = 10’ 

Height = 11’ 6”

Weight: Approximately 28,000 lbs. (12,700 kg)

Engine: Equipped with liquid-cooled 4.4 liter Caterpillar® diesel engine rated for 131hp (97.9 kW) @ 2200 rpm and compliant with European Union Stage IV and EPA Tier 4 Final regulations. Open engine compartment for maximum accessibility. 

Propel System: Hydrostatic propel motors driving through 20.5:1 wheel drives for individual track control

Tracks: Two 33" flat tracks half urethane 13 tooth drive sprocket, half urethane 12 tooth idler sprocket. Tracks mounted on twin tandem four-wheel system (two tandems per track)

Hydraulic System: Engine driven pump drive. Hydrostatic propel system consists of two closed-loop pumps driving a hydraulic propel motors mounted on 30.5:2 drives. Charge loop filtration. Hydraulic reservoir mounted outside engine compartment with cleanout port and shutoff valve. Equipped with electric emergency pump. Upper structure tilt system and boom up/down system equipped with lock valves.

Electrical System: 24-volt dc negative ground with engine-driven alternator and two 12-volt batteries with 1000 cold-cranking amps each. Equipped with safety electric strobe light. 

Capacities: 

Fuel: 90 gal. (340.7 liters)

Hydraulic: 13 gal. (49.21 liters)

Cab: Equipped with 1 1/4" tinted Lexgard® top, engine instruments, and ergonomic seat. Equipped with light touch hydraulic pilot pressure joystick for extend-lift-swing-tilt boom controls, convex mirror, secondary exit, standard wiper and A/C & Heating console. Heavy duty swing bearing with worm gear drive for maximum tooth engagement. Floor is fully enclosed. Access door is full length tinted Lexgard® with positive latch. 

Boom: Telescoping composite construction with 75 ft. (22.8 m) reach from ground. Telescoping boom driven with #50 chain. Each unit is electrically insulated and tested to ANSI A92.2-2001 Category C standards to 100 kV for maximum operator safety. Equipped with single 24 inch (609.6 mm) diameter carbide-tipped saw turning @ 2800 rpm.

Options: Fire extinguishers, rearview camera and other options available upon request

QUICK START GUIDE

of

The Kershaw® SkyTrim 75 G3 Quick Start Guide

PARTS HOTLINE: 1-888-660-5252

SERVICE HOTLINE: 1-833-537-7782

KERSHAW® PARTS CATALOG

A customer-focused website dedicated to all Kershaw® machines, allowing you to search for machine-specific parts, build parts lists and view individual parts for accurate parts ordering. All related operational and maintenance manuals, parts manuals and service bulletins are available for immediate download.

SHOP NOW
Kershaw® Parts Catalog
Kershaw® Parts Catalog

SALES CONTACTS


Hal Acree 

National Sales Manager - Vegetation/Utility
Lafayette, IN
765-404-2550

EMAIL

 

Mark Book

Account Executive - Vegetation/Utility
Montgomery, AL
502-432-9302

EMAIL
 

Carlton Hardman 

Account Executive
Montgomery, AL
251-583-3704

EMAIL

RELATED MACHINES

KERSHAW® PARTS CATALOG

Parts Hotline: 1-888-660-5252

Service-Hotline: 1-833-537-7782

SHOP NOW
TREE TRIMMER, PARTS CATALOG
TREE TRIMMER, PARTS CATALOG