The Kershaw® 35-13 is a heavy-duty brush wheel tie plate broom capable of removing all ballast and debris from the tie plate areas after new tie insertion in high-speed gangs.
Frame: The main frame is of all-welded construction using heavy six-inch structural channel. Cross members are of five-inch channel with reinforcements.
Weight: 16,500 lbs.
Engine: Caterpillar C2.2 40 hp @ 2800 rpm Tier IV Final
Propel System: Three-inch diameter solid steel alloy axles with direct chain drive. A drive sprocket disconnect kit is provided for use when towing. Maximum towing speed is 16 mph.
Wheels & Brakes: 16 inch cast steel wheels. Spring applied, hydraulic released fail safe brakes on right side wheels. Heavy-duty axle bearings.
Electrical System: 12 volt dc negative ground. System maintained by engine driven 85 amp alternator. Color-coded and numbered wiring.
Hydraulic System: A variable displacement, pressure compensated pump operates at 2000 psi. Valves are electric solenoid controlled. They hydraulic tank houses a 100 mesh suction screen and a 10-micron return line filter.
Capacities: Fuel: 22 gal. (83 liters), Hydraulic: 53 gal. (200 liters), Engine Crankcase: 8.5 qt. (8 liters)
Work Interrupt System: A work interrupt system stops the machine when an obstacle is encountered. An optional crossing work interrupt system stops the machine when the machine approaches a crossing.
Options: Crossing interrupt system, drag leg, air-operated propel clutch.
Dimensions: Length: 19 ft. 6 in., Width: 10 ft. 3 in., Height: 8 ft. 3 in.
Randy Chubaty
National Sales Manager - Rail
Fairmont, MN
507-384-2577
Jennifer Kincaid
Sales Executive - Rail
Bradenton, FL
414-369-9290
Hal Acree
National Sales Manager - Vegetation/Utility
Lafayette, IN
765-404-2550
Mark Book
Account Executive - Vegetation/Utility
Louisville, KY
502-432-9302
Carlton Hardman
Account Executive
Montgomery, AL
251-583-3704
David May
International Sales Director
+1-469-934-8284
Adam Todd
Director, International Business Development
+44 (0) 7966 337924
Luiz Melo
Business Development Director LATAM
Phone: +55 (31) 3779-6729
Cell: +55 (11) 97019-0338
Rob de Beer
Business Development Manager Australia
+61 (0) 408 010 983
Parts Hotline
1-888-660-5252
Service Hotline
1-833-537-7782
Julian Howard
Sales Manager, Aftermarket Parts
Office: 334-387-9426
Fax: 334-387-9400
Cell: 334-235-0922
Wade Akers
National Service Manager
Montgomery, AL
Office: 334-387-9403
Cell: 334-425-8123