KERSHAW® SCORPION RS70 DL RAMP
Progress Rail’s Maintenance-of-Way (MOW) division was born out of the movement toward mechanization in the railroad industry and introduced the first Kershaw® Ballast Regulator in 1945. Today, Progress Rail supplies Kershaw® MOW equipment, providing machines to all Class I railroads, transit and short lines and contractors around the world.
The Kershaw® RS70 Ramp is a “roll-up” loading ramp that can be used to load all work equipment that is normally transported on a flat car. It can load both rail-bound and rubber-tired machines. Rubber tired and most rail-bound machines can climb the 7% slope with ease. A winch is provided for disabled machines or machines that do not have sufficient traction to climb the ramp slope. One man can extend or retract the ramp in under 5 minutes using a remote pushbutton control.
The Kershaw® RS70 Ramp is a “roll-up” loading ramp that can be used to load all work equipment that is normally transported on a flat car. It can load both rail-bound and rubber-tired machines. Rubber tired and most rail-bound machines can climb the 7% slope with ease. A winch is provided for disabled machines or machines that do not have sufficient traction to climb the ramp slope. One man can extend or retract the ramp in under 5 minutes using a remote pushbutton control.
The Kershaw® RS70 Ramp is a “roll-up” loading ramp that can be used to load all work equipment that is normally transported on a flat car. It can load both rail-bound and rubber-tired machines. Rubber tired and most rail-bound machines can climb the 7% slope with ease. A winch is provided for disabled machines or machines that do not have sufficient traction to climb the ramp slope. One man can extend or retract the ramp in under 5 minutes using a remote pushbutton control.
TECHNICAL DETAILS
Weight: The ramp adds 19,500 lbs. to the weight of a flat car.
Construction: Welded from tubular steel. Tread bearing areas are made from wear resistant steel.
Engine: Liquid cooled diesel Cat® C1.7 31 hp (23.1 kw) @ 2800 rpm
Winch: Equipped with 5/8 (16 mm) inch wire rope. Retrieval speeds: 12 (3.66 m) feet per minute/high speed; 7 (2.13 m) feet per minute/low speed. Maximum tension: 20,000 lbs. (9072 kg)
Hydraulic System: A gear pump is driven directly by the engine providing hydraulic power to the ramp control circuit. Filters protect the ramp circuits from contamination. A pendant with pushbuttons is used to energize a solenoid directional valve that cycles the ramp.
Electrical System: 12 volt dc negative ground. Maintained by an engine driven 85 amp alternator. Equipped with a special coiled plate 50 amp hour. Color coded and numbered wiring.
Loading Capacity: The ramp can support 40,000 pounds (18144 kg) per axle on rail bound machines and 30,000 pounds (13608 kg) per axle on rubber tired machines.
Capacities: Fuel: 11.5 gal. (43.5 l), Hydraulic: 25 gal. (94.6 l)
Options: Adjustable wheel chocks, turnbuckle tie downs, bridging bar systems to allow movement of machines from one flat car to another.
U.S. Patent Number 5,697,754
KERSHAW® MOW OVERVIEW
PARTS HOTLINE: 1-888-660-5252
SERVICE HOTLINE: 1-833-537-7782
SALES CONTACTS
RAIL EQUIPMENT SALES
VEGETATION EQUIPMENT SALES
INTERNATIONAL SALES
OEM PARTS, SERVICE & WARRANTY
KERSHAW DIRECTOR
Randy Chubaty
National Sales Manager - Rail
Fairmont, MN
507-384-2577
Jennifer Kincaid
Sales Executive - Rail
Bradenton, FL
414-369-9290
Hal Acree
National Sales Manager - Vegetation/Utility
Lafayette, IN
765-404-2550
Mark Book
Account Executive - Vegetation/Utility
Louisville, KY
502-432-9302
Carlton Hardman
Account Executive
Montgomery, AL
251-583-3704
David May
International Sales Director
+1-469-934-8284
Adam Todd
Director, International Business Development
+44 (0) 7966 337924
Luiz Melo
Business Development Director LATAM
Phone: +55 (31) 3779-6729
Cell: +55 (11) 97019-0338
Rob de Beer
Business Development Manager Australia
+61 (0) 408 010 983
Parts Hotline
1-888-660-5252
Service Hotline
1-833-537-7782
Julian Howard
Sales Manager, Aftermarket Parts
Office: 334-387-9426
Fax: 334-387-9400
Cell: 334-235-0922
Wade Akers
National Service Manager
Montgomery, AL
Office: 334-387-9403
Cell: 334-425-8123
