KERSHAW® 44-2 ROTARY SCARIFIER

Frame: The frame is off all welded construction using structural channel and formed plate.

Weight: 18,000 pounds.

Engine: Caterpillar C4.4 131hp at 2200rpm Tier IV final

Propel System: 3” (76 mm) diameter solid axles with chain drive from separate hydraulic motors driving both axles. Travel speed: 20 mph (32 km/hr). Two (2) propel drive motors for quicker response in work mode. #100 drive chain with hardened tooth sprockets. Heavy duty axle bearings.

Wheels and Brakes: 16” (406 mm) cast steel wheels. External, individual composite brake shoes applied directly on centerline of wheel tread. Service brakes are air applied, spring released. Emergency/parking brakes are spring applied, air released.

Electrical System: 24VDC negative ground. System maintained by engine driven alternator. Color coded and numbered wiring.

Hydraulic System: Pressure compensated piston type pump direct coupled to engine. Hydraulic oil is filtered through a 100 mesh (145 micron) suction screen and 10 micron return line filter. Manifold-type stack valves for improved serviceability. Electric emergency pump.

Capacities: Fuel: 75 gal, Hydraulic: 70 gal.

Air System: Air compressor, engine oil lubricated, air-cooled; pressure - 100-120 psi (689-927 kPa), 15 gallon air tank.

Cab: Large enclosed cab with 99.5 cubic foot capacity. Ergonomically designed seat. Large front windshield with unobstructed view of operation. Hydraulic pilot-pressure bottom-ported joystick controls on operator seat with heat shields. Self-contained hydraulically driven air conditioner/heater/pressurizer unit mounted on rear wall of cab (roof mount optional).

Options: Non-insulated wheels, Rotary head extension, yard work head extension, tie inserter winch with sweeper/ kicker, rock axle kit, rear rubber padded bumpers.

Dimensions: Length: 24 feet, 2 inches; Width: 11 feet, 6 inches; Height: 8 feet, 9 inches.