Progress Rail’s Maintenance-of-Way (MOW) division was born out of the movement toward mechanization in the railroad industry and introduced the first Kershaw® Ballast Regulator in 1945. Today, Progress Rail supplies Kershaw® MOW equipment, providing machines to all Class I railroads, transit and short lines and contractors around the world.
The Kershaw® 34-7 Horizontal Scarifier scarifies the tie bed with minimum disturbance to the line and surface of the track. The Kershaw® 34-7 Horizontal Scarifier is a self-propelled machine designed to loosen and remove ballast and other debris from the cribs where old ties have been removed. The head design enables the machine to consistently scarify the right amount of ballast for easy tie insertion with a minimum of tie bed disturbance and tamping requirements.
Frame: The frame is off all welded construction using structural channel and formed plate.
Weight: 15,800 lbs.
Engine: Caterpillar C4.4 131 hp @ 2200 rpm Tier IV final
Propel System: 3” (76 mm) diameter solid axles with chain drive from separate hydraulic motors driving both axles. Travel speed: 20 mph (32 km/hr). Two (2) propel drive motors for quicker response in work mode. #100 drive chain with hardened tooth sprockets. Heavy duty axle bearings.
Wheels and Brakes: 16” (406 mm) cast steel wheels. External, individual composite brake shoes applied directly on centerline of wheel tread. Service brakes are air applied, spring released. Emergency/parking brakes are spring applied, air released.
Electrical System: 24-volt DC negative ground. System maintained by engine driven alternator. Color coded and numbered wiring.
Hydraulic System: Pressure compensated piston type pump direct coupled to engine. Hydraulic oil is filtered through a 100 mesh (145 micron) suction screen and 10 micron return line filter. Manifold-type stack valves for improved serviceability. Electric emergency pump.
Capacities: Fuel: 75 gal. Hydraulic: 70 gal.
Air System: Air compressor, engine oil lubricated, air-cooled; pressure - 100-120 psi (689-927 kPa), 15 gallon air tank.
Cab: Large enclosed cab with 99.5 cubic foot capacity. Ergonomically designed seat. Large front windshield with unobstructed view of operation. Hydraulic pilot-pressure bottom-ported joystick controls on operator seat with heat shields. Self-contained hydraulically driven air conditioner/ heater/pressurizer unit mounted on rear wall of cab (roof mount optional).
Options: Non-insulated wheels, extended reach head extension, tie inserter winch with sweeper to remove ballast from new ties, rock axle kit, rear rubber padded bumpers.
Power, performance, and Innovation - Progress Rail's MOW equipment. Progress Rail offers a wide variety of Maintenance of Way equipment meeting the needs of customers in many different climates and situations. -Sand Remover -Snow Fighter -Kribber Adzer -Shoulder Ballast Cleaner -One-Pass Ballast Regulator -4600 Ballast Regulator -Tie Replacer -Tie Crane
Vice President - International Trackwork
International Sales Director
Director, International Business Development
+44 (0) 7966 337924
Rob de Beer
Business Development Manager Australia
+61 (0) 408 010 983