SkyTrim 75 G2
The SkyTrim is a rough terrain, rubber-tired vehicle with telescoping boom and saw-type cutter head designed to trim trees.
SkyTrim 75 G2 Brochure (PDF)
SkyTrim 75 G2 Spec Sheet (PDF)
Cab
Cab roof is equipped with 1-1/4" thick Lexgard® for visibility and maximum protection. Pilot pressure hydraulic joysticks reduce arm fatigue and control extend-liftswing-tilt functions for boom. Ergonomically positioned foot propel control reduces operator leg fatigue during operation. Boom and cab swing 360° to trim at all quadrants. Optional air conditioner and heater available.
Power Train
Equipped with two-speed heavyduty powershift transmission for shift-on-the-go capability and reliability. Hydrostatic four-wheel drive provides rough terrain negotiability. Rear axle is rigid mounted and front axle oscillates.
Heavy-duty axles equipped with internal wet disk service brakes. Separate parking brake is fail-safe spring-applied/hydraulic-released wet disk. Wet disk inboard service brakes are built-in the axles and ensure safe stopping capabilities every time. Separate parking brake prevents machine from rolling while parked.
Boom
Boom extends to 75 feet to trim the tallest trees. Boom construction of fiberglass composite material is electrically insulated for safety. Equipped with single 24 inch diameter carbide tipped saw with direct hydraulic drive and limb deflectors.
Cab Access
Cab access door is full length shatter- proof Lexgard® for operator protection and maximum visibility. Door design shields operator from limbs and flying debris for additional safety. Secure door latch ensures positive closure. The cab design offers an unmatched field-of-view.
Tilt Feature
Upperstructure and cab are designed for 40° lateral tilt to either side to shift weight balance to allow flexibility in trimming and operation on inclines. The SkyTrim does not require outriggers or setup time.
Engine Compartment
Engine compartment access doors are made of aircraft-grade composite material to allow easy handling and light weight. The composite material is extremely durable and stable. Open grid design allows maximum air circulation for engine. Positive easy-to-operate latches secure access doors.
The hydraulic reservoir is mounted outside the engine compartment allowing easy access to hydraulic pumps and other components. The reservoir includes clean-out ports and a shutoff valve. A hydraulic oil cooler insures reliable operation.
Adjustable Width
Overall tire tread width with standard tires is adjustable from the 10 feet working width to 8 feet 6 inches travel width to allow easier transportation.
Winch
Rear-mounted 20,000 lb. hydraulic winch with cab control provides extraction insurance in extreme wet terrain conditions. An additional front mounted winch is available as an option.
Blade
Front mounted dozer-type blade is hydraulically operated from cab for clearing limbs and debris. Blade increases stability in the down position. Blade design will not inhibit ground clearance in up position.
Both tracked and hi-rail models are also available.
Locations
10650 Hwy. 80 East
Montgomery, AL 36117
P.O. Box 244100
Montgomery, AL 36124
Phone: 800-633-5766
Sales Contact
Mike Balkom
National Sales Manager
Office: 334-387-9100
Cell: 334-799-4075
Parts and Service
Tommy Pair
Office: 334-387-9409
Cell: 334-235-0922