drawer

Klearway 500 Brush Cutter

Cab Cutting Maneuvering Powertrain Engine Compartment Winch
Kershaw

The Klearway 500 Brush Cutter is a rough terrain, rubber-tired brush cutter with a front mounted rotary or shredder-type cutterhead designed to clear vegetation from utility right-of-ways, railroad right-of-ways and for site preparation.

Klearway 500 Brush Cutter Brochure (PDF)

Klearway 500 Brush Cutter Spec Sheet (PDF)


Klearway 500 Brush Cutter

Cab

Angled front roof panel equipped with viewing window to allow easier positioning in utility right-of-way. Pilot-pressure joystick control for cutterhead tilt and lift functions. Tilt steering wheel with flow amplification steering. Self contained air conditioner/heater. Fully adjustable seat with suspension and belts. Large roomy cab with easy access and excellent visibility.

Cutterheads

Choice of mulching shredder-type or rotary-type cutterheads. Both cutterheads are equipped with closed loop hydrostatic drives. Rotary cutterheads allow independent rotation control of each cutterdisk to control the direction of debris discharge. The shredder-type cutterhead is ideal where reduction of vegetation to a fine mulch is desired with almost no limits to the size of material that can be processed. The shredder-type can handle trees, stumps, slash, limbs, roots and more.

Maneuvering

The machine is capable of 50 degrees right or left steering. The steering is enhanced by flow amplification technology to allow precise, quick, and effortless steering. The machine has the ability to turn 360 degrees within a 35 foot utility right-of-way without stopping.

Power Train

Equipped with two-speed powershift shift on-the-go transmission. Hydrostatic four-wheel drive with axles equipped with selectable lockout as well as wet-disc inboard service brakes. A wet-disc fail-safe parking brake is driveline mounted.

Engine Compartment

The engine compartment houses a Caterpillar© C6.6 Tier 3 engine rated at 202 horsepower. Special design louvers and perforations allow proper air flow around the engine and to the hydraulically-driven high capacity oil cooler.

Winch

Rear-mounted 20,000 lb. hydraulic winch with cab control provides extraction insurance in extreme wet terrain conditions. The winch is equipped with a fairlead, tensioner and 160 feet of 5/8 wire cable rated for 20.6 tons breaking strength.

Locations

10650 Hwy. 80 East
Montgomery, AL 36117

P.O. Box 244100
Montgomery, AL 36124
Phone: 800-633-5766

Sales Contact

Mike Balkom
National Sales Manager
Office: 334-387-9100
Cell: 334-799-4075

Parts and Service

Paul Venaglia
Sales Representative - Northern U.S.
Office: 563-508-3867

Josh Williams
Sales Representative - Southern U.S.
Office: 334-207-1434