The new Kershaw 4600 Ballast Regulator has a one pass transfer plow, 36-inch wide reversible wings and a broom attachment for ballast shaping, shoulder profiling, ballast sweeping, and a variety of other track maintenance operations.
Designed to perform bridge and open deck trestle work, the Model 12-12 Bridge Crane has maximum lifting capacity of 1200 lbs. (544 kg.) at 24 feet (7315 mm.) from center of track.
The 34-7 Horizontal Scarifier scarifies the tie bed with minimum disturbance to the line and surface of the track.
The Kershaw RS64 Ramp is a "roll-up" loading ramp, which can be used to load all work equipment that is normally transported on a flat car. It can load both rail bound and rubber tired machines.
The Kershaw 46-2 Ballast Regulator is a medium-production ballast shaping and profiling machine. It is equipped one pass transfer plow, 36” (914 mm) wide reversible wings, and a broom attachment making it a powerful versatile machine for ballast shaping, shoulder profiling, and a variety of other track maintenance
The 12-12 Tie Crane is designed to perform safe, efficient tie handling operations. The Model 12-12 has a maximum lifting capacity of 1,200 pounds at 24 feet from the center of the track.
The ballast is removed from between ties at the tie plate area after which the machine adzes the cross ties at the tie plate seat for the placement of new tie plates.
The Kershaw Model 47-6 Tie Replacer can remove or insert wood or concrete ties up to 18 feet long. The puller/inserter head operates on a slewing ring to allow functionality and versatility from either side of the track without turning the machine.
The Kershaw High Performance 46-6 Ballast Regulator has a one pass transfer plow, 36” (914 mm) wide reversible wings, and a broom attachment-making it a powerful versatile machine for ballast shaping, shoulder profiling, and a variety of other track maintenance operations.
The Kershaw Model 32-10 Brushcutter clears brush and overhanging tree branches from railroad right-of-way. Hydraulically controlled booms are attached to each side of the Brushcutter.
The Kershaw Model 44-2 Rotary Scarifier is designed to meet the requirements of those maintenance-of-way operations that prefer the rotary head method of preparing the tie bed for tie insertion.
The M318-HR is a rubber tired vehicle equipped with hi-rails for performing a variety of railroad maintenance-of-way functions, both on and off track, by utilizing a wide range of attachments and options.